Hazard-Striped Duct Tape (67210)

High quality Polyethylene-coated cloth duct tape with natural rubber with synthetic adhesive.

A 63 mesh, high quality polyethylene-coated cloth, coated with a natural rubber based adhesive, and wound on a 3” neutral core. The film is printed with a black/yellow stripe pattern used as a permanent or temporary zone/aisle marking of hazardous areas or as differentiate work zones (warehouses, stores, office buildings, etc.).

FEATURES/BENEFITS:

Easy to apply – the tape is hand-tearable (no cutting tools required), tears evenly across web and adheres to a variety of substrates

Peels off easily upon removal, leaving no residue (on most surfaces).

Excellent water and abrasion resistance.

Conforms well to irregular surfaces, and will not twist or curl during application.

APPLICATIONS:

Marking of dangerous areas, work zones, or stairs.

Highlight “caution” for tripping hazards (wires, cords, beams, etc.).

Ideal for use in manufacturing, convention/exhibition halls and residential/commercial sites.

Floor/aisle marking tape to differentiate work zones (warehouse, stores, offices, etc.).

PHYSICAL PROPERTIES:

Backing	63 mesh Polyethylene-Coated Cloth
Adhesive	Natural Rubber
Total Thickness	11.8 mils (0.30mm)
Peel Adhesion	35.8 oz/inch
Tensile Strength	29.5 lbs/inch
Application Temperature	40°F to 95°F
Temperature Resistance	-31°F to 176°F
Available Color (1)	Black/Yellow Stripes

NOTE: The physical properties listed above are typical test results obtained from a series of laboratory tests and should not be used for the purpose of writing specifications. Before using this product, user shall determine the suitability of the product for his/her use; and user assumes all risks and liabilities in connection therewith. All test procedures used are in accordance with ASTM and PSTC methods.

Shipping and Returns

All non-specialty unused and unopened items received within 30 days may be returned for a full refund or exchange of the product. Tape Jungle will also pay for the return shipping if returned due to company error or product defect.

A 15% restocking fee will apply to converted items, sizes that are listed on the website but cut specifically to order. Custom orders, as defined as application-specific sizes that are NOT listed on the website are non-returnable without prior approval except in the event of company error.

If unsure of the policy, confirm prior to placing your order or request a sample.

Reviews